{"title":"Gear","description":"\u003cp\u003eGear products include timing pulleys, spur gears, drive gears and related transmission parts used in carriage, feed, pump, cutter and maintenance mechanisms.\u003c\/p\u003e \u003cp\u003eChoose gears by tooth count, pitch, bore diameter, outer diameter, belt profile, shaft type, material and installed position. Similar gears may differ by small dimensions that affect motion accuracy.\u003c\/p\u003e \u003cp\u003eBefore ordering, confirm old gear photos, measurements, tooth profile and the printer mechanism where it is installed.\u003c\/p\u003e","products":[{"product_id":"25-tooth-aluminum-idler-pulley-for-wide-format-printer","title":"25-Tooth Aluminum Idler Puleggia per Wide Format Stampante","description":"\u003ch2\u003ePanoramica prodotto\u003c\/h2\u003e\u003cp\u003e25-Tooth Aluminum Idler Puleggia for Wide Format Stampante is a replacement idler puleggia for large format stampante motor, belt, carriage or drive systems. Choose this part by tooth count, puleggia profile, bore size, shaft fit, belt pitch and old part dimensions.\u003c\/p\u003e\u003ch2\u003eCompatibilità e utilizzo\u003c\/h2\u003e\u003cp\u003eStampante \/ application reference: \u003cstrong\u003eWide Format, Stampante\u003c\/strong\u003e. Model reference: \u003cstrong\u003e25-Tooth Aluminum Idler Puleggia for Wide Format Stampante\u003c\/strong\u003e.\u003c\/p\u003e\u003ch2\u003eSpecifiche tecniche\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSource SKU \/ Rows\u003c\/td\u003e\n\u003ctd\u003eGear - 008 \/ 电机，电机轮 row 39\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Tipo\u003c\/td\u003e\n\u003ctd\u003eIdler Puleggia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTooth \/ Profile Reference\u003c\/td\u003e\n\u003ctd\u003e25-Tooth, 25齿\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial Reference\u003c\/td\u003e\n\u003ctd\u003ealuminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStampante \/ Use Reference\u003c\/td\u003e\n\u003ctd\u003eWide Format, Stampante\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eOpzioni disponibili\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003cth\u003eVariant Option\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eGear - 008\u003c\/td\u003e\n\u003ctd\u003eDefault Title\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm tooth count, outer diameter, bore diameter, shaft shape, keyway or set-screw position, belt pitch, puleggia width, material and installed position. Similar pulleys may not be interchangeable if the bore, belt profile or mounting offset is different.\u003c\/p\u003e\u003ch2\u003eInstallation Notice\u003c\/h2\u003e\u003cp\u003ePower off the stampante before replacement. After installation, check puleggia alignment, belt tension, set-screw tightness, motor direction, carriage\/feed movement and homing before production printing.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCan I choose by tooth count only?\u003c\/strong\u003e\u003cbr\u003eNo. Tooth count must be checked together with bore size, belt pitch, width and mounting position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I send if unsure?\u003c\/strong\u003e\u003cbr\u003eSend photos of the old puleggia, shaft, belt, installed position and stampante model, plus measured bore and outer diameter.\u003c\/p\u003e","brand":"Accessories","offers":[{"title":"Default Title","offer_id":44767768674490,"sku":"Gear - 008","price":33.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/6897\/8362\/files\/25-Tooth-Aluminum-Idler-Pulley-for-Wide-Format-Printer-1.webp?v=1762853723"},{"product_id":"45-tooth-aluminum-idler-pulley-for-wide-format-printer","title":"45-Tooth Aluminum Idler Puleggia per Wide Format Stampante","description":"\u003ch2\u003ePanoramica prodotto\u003c\/h2\u003e\u003cp\u003e45-Tooth Aluminum Idler Puleggia for Wide Format Stampante is a replacement idler puleggia for large format stampante motor, belt, carriage or drive systems. Choose this part by tooth count, puleggia profile, bore size, shaft fit, belt pitch and old part dimensions.\u003c\/p\u003e\u003ch2\u003eCompatibilità e utilizzo\u003c\/h2\u003e\u003cp\u003eStampante \/ application reference: \u003cstrong\u003eWide Format, Stampante\u003c\/strong\u003e. Model reference: \u003cstrong\u003e45-Tooth Aluminum Idler Puleggia for Wide Format Stampante\u003c\/strong\u003e.\u003c\/p\u003e\u003ch2\u003eSpecifiche tecniche\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSource SKU \/ Rows\u003c\/td\u003e\n\u003ctd\u003eGear - 009 \/ 电机，电机轮 row 40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Tipo\u003c\/td\u003e\n\u003ctd\u003eIdler Puleggia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTooth \/ Profile Reference\u003c\/td\u003e\n\u003ctd\u003e45-Tooth, 45齿\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial Reference\u003c\/td\u003e\n\u003ctd\u003ealuminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStampante \/ Use Reference\u003c\/td\u003e\n\u003ctd\u003eWide Format, Stampante\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eOpzioni disponibili\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003cth\u003eVariant Option\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eGear - 009\u003c\/td\u003e\n\u003ctd\u003eDefault Title\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm tooth count, outer diameter, bore diameter, shaft shape, keyway or set-screw position, belt pitch, puleggia width, material and installed position. Similar pulleys may not be interchangeable if the bore, belt profile or mounting offset is different.\u003c\/p\u003e\u003ch2\u003eInstallation Notice\u003c\/h2\u003e\u003cp\u003ePower off the stampante before replacement. After installation, check puleggia alignment, belt tension, set-screw tightness, motor direction, carriage\/feed movement and homing before production printing.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCan I choose by tooth count only?\u003c\/strong\u003e\u003cbr\u003eNo. Tooth count must be checked together with bore size, belt pitch, width and mounting position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I send if unsure?\u003c\/strong\u003e\u003cbr\u003eSend photos of the old puleggia, shaft, belt, installed position and stampante model, plus measured bore and outer diameter.\u003c\/p\u003e","brand":"Accessories","offers":[{"title":"Default Title","offer_id":44767771820218,"sku":"Gear - 009","price":24.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/6897\/8362\/files\/45-Tooth-Aluminum-Idler-Pulley-for-Wide-Format-Printer-1_262fb909-d22c-4e65-9fff-ba285d79e5bf.webp?v=1762914982"},{"product_id":"idler-pulley-for-mimaki-jv300-jv150-wide-format-printer","title":"Idler Puleggia per Mimaki JV300 \/ JV150 Wide Format Stampante","description":"\u003ch2\u003ePanoramica prodotto\u003c\/h2\u003e\u003cp\u003eIdler Puleggia for Mimaki JV300 \/ JV150 Wide Format Stampante is a replacement idler puleggia for large format stampante motor, belt, carriage or drive systems. Choose this part by tooth count, puleggia profile, bore size, shaft fit, belt pitch and old part dimensions.\u003c\/p\u003e\u003ch2\u003eCompatibilità e utilizzo\u003c\/h2\u003e\u003cp\u003eStampante \/ application reference: \u003cstrong\u003eMimaki JV300, Mimaki JV150, Wide Format, Stampante\u003c\/strong\u003e. Model reference: \u003cstrong\u003eIdler Puleggia for Mimaki JV300 \/ JV150 Wide Format Stampante\u003c\/strong\u003e.\u003c\/p\u003e\u003ch2\u003eSpecifiche tecniche\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSource SKU \/ Rows\u003c\/td\u003e\n\u003ctd\u003eGear - 010 \/ 电机，电机轮 row 41\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Tipo\u003c\/td\u003e\n\u003ctd\u003eIdler Puleggia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTooth \/ Profile Reference\u003c\/td\u003e\n\u003ctd\u003econfirm tooth count and puleggia profile by old part\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial Reference\u003c\/td\u003e\n\u003ctd\u003econfirm by old puleggia and product photos\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStampante \/ Use Reference\u003c\/td\u003e\n\u003ctd\u003eMimaki JV300, Mimaki JV150, Wide Format, Stampante\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eOpzioni disponibili\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003cth\u003eVariant Option\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eGear - 010\u003c\/td\u003e\n\u003ctd\u003eDefault Title\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm tooth count, outer diameter, bore diameter, shaft shape, keyway or set-screw position, belt pitch, puleggia width, material and installed position. Similar pulleys may not be interchangeable if the bore, belt profile or mounting offset is different.\u003c\/p\u003e\u003ch2\u003eInstallation Notice\u003c\/h2\u003e\u003cp\u003ePower off the stampante before replacement. After installation, check puleggia alignment, belt tension, set-screw tightness, motor direction, carriage\/feed movement and homing before production printing.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCan I choose by tooth count only?\u003c\/strong\u003e\u003cbr\u003eNo. Tooth count must be checked together with bore size, belt pitch, width and mounting position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I send if unsure?\u003c\/strong\u003e\u003cbr\u003eSend photos of the old puleggia, shaft, belt, installed position and stampante model, plus measured bore and outer diameter.\u003c\/p\u003e","brand":"iColorPro","offers":[{"title":"Default Title","offer_id":44767776669882,"sku":"Gear - 010","price":55.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/6897\/8362\/files\/Idler-Pulley-for-Mimaki-JV300-JV150-Wide-Format-Printer-1.webp?v=1762853894"},{"product_id":"20-tooth-motor-pulley-for-wide-format-printer","title":"20-Tooth Motor Puleggia per Wide Format Stampante","description":"\u003ch2\u003ePanoramica prodotto\u003c\/h2\u003e\u003cp\u003e20-Tooth Motor Puleggia for Wide Format Stampante is a replacement motor puleggia for large format stampante motor, belt, carriage or drive systems. Choose this part by tooth count, puleggia profile, bore size, shaft fit, belt pitch and old part dimensions.\u003c\/p\u003e\u003ch2\u003eCompatibilità e utilizzo\u003c\/h2\u003e\u003cp\u003eStampante \/ application reference: \u003cstrong\u003eWide Format, Stampante\u003c\/strong\u003e. Model reference: \u003cstrong\u003e20-Tooth Motor Puleggia for Wide Format Stampante\u003c\/strong\u003e.\u003c\/p\u003e\u003ch2\u003eSpecifiche tecniche\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSource SKU \/ Rows\u003c\/td\u003e\n\u003ctd\u003eGear - 001 \/ 电机，电机轮 row 32\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Tipo\u003c\/td\u003e\n\u003ctd\u003eMotor Puleggia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTooth \/ Profile Reference\u003c\/td\u003e\n\u003ctd\u003e20-Tooth, 20齿\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial Reference\u003c\/td\u003e\n\u003ctd\u003econfirm by old puleggia and product photos\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStampante \/ Use Reference\u003c\/td\u003e\n\u003ctd\u003eWide Format, Stampante\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eOpzioni disponibili\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003cth\u003eVariant Option\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eGear - 001\u003c\/td\u003e\n\u003ctd\u003eDefault Title\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm tooth count, outer diameter, bore diameter, shaft shape, keyway or set-screw position, belt pitch, puleggia width, material and installed position. Similar pulleys may not be interchangeable if the bore, belt profile or mounting offset is different.\u003c\/p\u003e\u003ch2\u003eInstallation Notice\u003c\/h2\u003e\u003cp\u003ePower off the stampante before replacement. After installation, check puleggia alignment, belt tension, set-screw tightness, motor direction, carriage\/feed movement and homing before production printing.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCan I choose by tooth count only?\u003c\/strong\u003e\u003cbr\u003eNo. Tooth count must be checked together with bore size, belt pitch, width and mounting position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I send if unsure?\u003c\/strong\u003e\u003cbr\u003eSend photos of the old puleggia, shaft, belt, installed position and stampante model, plus measured bore and outer diameter.\u003c\/p\u003e","brand":"Accessories","offers":[{"title":"Default Title","offer_id":44767777325242,"sku":"Gear - 001","price":5.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/6897\/8362\/files\/20-Tooth-Motor-Pulle-for-Wide-Format-Printer-1.webp?v=1762931088"},{"product_id":"24-tooth-motor-pulley-for-wide-format-printer","title":"24-Tooth Motor Puleggia per Wide Format Stampante","description":"\u003ch2\u003ePanoramica prodotto\u003c\/h2\u003e\u003cp\u003e24-Tooth Motor Puleggia for Wide Format Stampante is a replacement motor puleggia for large format stampante motor, belt, carriage or drive systems. Choose this part by tooth count, puleggia profile, bore size, shaft fit, belt pitch and old part dimensions.\u003c\/p\u003e\u003ch2\u003eCompatibilità e utilizzo\u003c\/h2\u003e\u003cp\u003eStampante \/ application reference: \u003cstrong\u003eWide Format, Stampante\u003c\/strong\u003e. Model reference: \u003cstrong\u003e24-Tooth Motor Puleggia for Wide Format Stampante\u003c\/strong\u003e.\u003c\/p\u003e\u003ch2\u003eSpecifiche tecniche\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSource SKU \/ Rows\u003c\/td\u003e\n\u003ctd\u003eGear - 002 \/ 电机，电机轮 row 33\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Tipo\u003c\/td\u003e\n\u003ctd\u003eMotor Puleggia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTooth \/ Profile Reference\u003c\/td\u003e\n\u003ctd\u003e24-Tooth, 24齿\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial Reference\u003c\/td\u003e\n\u003ctd\u003econfirm by old puleggia and product photos\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStampante \/ Use Reference\u003c\/td\u003e\n\u003ctd\u003eWide Format, Stampante\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eOpzioni disponibili\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003cth\u003eVariant Option\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eGear - 002\u003c\/td\u003e\n\u003ctd\u003e20-Tooth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGear - 002 - 1\u003c\/td\u003e\n\u003ctd\u003e24-Tooth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm tooth count, outer diameter, bore diameter, shaft shape, keyway or set-screw position, belt pitch, puleggia width, material and installed position. Similar pulleys may not be interchangeable if the bore, belt profile or mounting offset is different.\u003c\/p\u003e\u003ch2\u003eInstallation Notice\u003c\/h2\u003e\u003cp\u003ePower off the stampante before replacement. After installation, check puleggia alignment, belt tension, set-screw tightness, motor direction, carriage\/feed movement and homing before production printing.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCan I choose by tooth count only?\u003c\/strong\u003e\u003cbr\u003eNo. Tooth count must be checked together with bore size, belt pitch, width and mounting position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I send if unsure?\u003c\/strong\u003e\u003cbr\u003eSend photos of the old puleggia, shaft, belt, installed position and stampante model, plus measured bore and outer diameter.\u003c\/p\u003e","brand":"Accessories","offers":[{"title":"20-Tooth","offer_id":44920392220858,"sku":"Gear - 002","price":5.5,"currency_code":"USD","in_stock":true},{"title":"24-Tooth","offer_id":44920392253626,"sku":"Gear - 002 - 1","price":5.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/6897\/8362\/files\/24-Tooth-Motor-Pulle-for-Wide-Format-Printer-1.webp?v=1762931127"},{"product_id":"28-tooth-motor-pulley-for-wide-format-printer","title":"28-Tooth Motor Puleggia per Wide Format Stampante","description":"\u003ch2\u003ePanoramica prodotto\u003c\/h2\u003e\u003cp\u003e28-Tooth Motor Puleggia for Wide Format Stampante is a replacement motor puleggia for large format stampante motor, belt, carriage or drive systems. Choose this part by tooth count, puleggia profile, bore size, shaft fit, belt pitch and old part dimensions.\u003c\/p\u003e\u003ch2\u003eCompatibilità e utilizzo\u003c\/h2\u003e\u003cp\u003eStampante \/ application reference: \u003cstrong\u003eWide Format, Stampante\u003c\/strong\u003e. Model reference: \u003cstrong\u003e28-Tooth Motor Puleggia for Wide Format Stampante\u003c\/strong\u003e.\u003c\/p\u003e\u003ch2\u003eSpecifiche tecniche\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSource SKU \/ Rows\u003c\/td\u003e\n\u003ctd\u003eGear - 003 \/ 电机，电机轮 row 34\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Tipo\u003c\/td\u003e\n\u003ctd\u003eMotor Puleggia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTooth \/ Profile Reference\u003c\/td\u003e\n\u003ctd\u003e28-Tooth, 28齿\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial Reference\u003c\/td\u003e\n\u003ctd\u003econfirm by old puleggia and product photos\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStampante \/ Use Reference\u003c\/td\u003e\n\u003ctd\u003eWide Format, Stampante\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eOpzioni disponibili\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003cth\u003eVariant Option\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eGear - 003\u003c\/td\u003e\n\u003ctd\u003eDefault Title\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm tooth count, outer diameter, bore diameter, shaft shape, keyway or set-screw position, belt pitch, puleggia width, material and installed position. Similar pulleys may not be interchangeable if the bore, belt profile or mounting offset is different.\u003c\/p\u003e\u003ch2\u003eInstallation Notice\u003c\/h2\u003e\u003cp\u003ePower off the stampante before replacement. After installation, check puleggia alignment, belt tension, set-screw tightness, motor direction, carriage\/feed movement and homing before production printing.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCan I choose by tooth count only?\u003c\/strong\u003e\u003cbr\u003eNo. Tooth count must be checked together with bore size, belt pitch, width and mounting position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I send if unsure?\u003c\/strong\u003e\u003cbr\u003eSend photos of the old puleggia, shaft, belt, installed position and stampante model, plus measured bore and outer diameter.\u003c\/p\u003e","brand":"Accessories","offers":[{"title":"Default Title","offer_id":44767852921018,"sku":"Gear - 003","price":6.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/6897\/8362\/files\/28-Tooth-Motor-Pulley-for-Large-Format-Printer-1.webp?v=1762931439"},{"product_id":"39-tooth-motor-pulley-for-wide-format-printer","title":"39-Tooth Motor Puleggia per Wide Format Stampante","description":"\u003ch2\u003ePanoramica prodotto\u003c\/h2\u003e\u003cp\u003e39-Tooth Motor Puleggia for Wide Format Stampante is a replacement motor puleggia for large format stampante motor, belt, carriage or drive systems. Choose this part by tooth count, puleggia profile, bore size, shaft fit, belt pitch and old part dimensions.\u003c\/p\u003e\u003ch2\u003eCompatibilità e utilizzo\u003c\/h2\u003e\u003cp\u003eStampante \/ application reference: \u003cstrong\u003eWide Format, Stampante\u003c\/strong\u003e. Model reference: \u003cstrong\u003e39-Tooth Motor Puleggia for Wide Format Stampante\u003c\/strong\u003e.\u003c\/p\u003e\u003ch2\u003eSpecifiche tecniche\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSource SKU \/ Rows\u003c\/td\u003e\n\u003ctd\u003eGear - 005 \/ 电机，电机轮 row 36\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Tipo\u003c\/td\u003e\n\u003ctd\u003eMotor Puleggia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTooth \/ Profile Reference\u003c\/td\u003e\n\u003ctd\u003e39-Tooth, 39齿\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial Reference\u003c\/td\u003e\n\u003ctd\u003econfirm by old puleggia and product photos\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStampante \/ Use Reference\u003c\/td\u003e\n\u003ctd\u003eWide Format, Stampante\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eOpzioni disponibili\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003cth\u003eVariant Option\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eGear - 005\u003c\/td\u003e\n\u003ctd\u003eDefault Title\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm tooth count, outer diameter, bore diameter, shaft shape, keyway or set-screw position, belt pitch, puleggia width, material and installed position. Similar pulleys may not be interchangeable if the bore, belt profile or mounting offset is different.\u003c\/p\u003e\u003ch2\u003eInstallation Notice\u003c\/h2\u003e\u003cp\u003ePower off the stampante before replacement. After installation, check puleggia alignment, belt tension, set-screw tightness, motor direction, carriage\/feed movement and homing before production printing.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCan I choose by tooth count only?\u003c\/strong\u003e\u003cbr\u003eNo. Tooth count must be checked together with bore size, belt pitch, width and mounting position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I send if unsure?\u003c\/strong\u003e\u003cbr\u003eSend photos of the old puleggia, shaft, belt, installed position and stampante model, plus measured bore and outer diameter.\u003c\/p\u003e","brand":"Accessories","offers":[{"title":"Default Title","offer_id":44767866618042,"sku":"Gear - 005","price":6.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/6897\/8362\/files\/39-Tooth-Motor-Pulle-for-Wide-Format-Printer-1.webp?v=1762931674"},{"product_id":"382-brass-gear-pulley-for-2000-series-large-format-printers","title":"382 Brass Gear Puleggia per 2000 Series Large Format Printers","description":"\u003ch2\u003ePanoramica prodotto\u003c\/h2\u003e\u003cp\u003e382 Brass Gear Puleggia for 2000 Series Large Format Printers is a replacement brass gear puleggia for large format stampante motor, belt, carriage or drive systems. Choose this part by tooth count, puleggia profile, bore size, shaft fit, belt pitch and old part dimensions.\u003c\/p\u003e\u003ch2\u003eCompatibilità e utilizzo\u003c\/h2\u003e\u003cp\u003eStampante \/ application reference: \u003cstrong\u003e2000 Series, Large Format, Stampante\u003c\/strong\u003e. Model reference: \u003cstrong\u003e382 Brass Gear Puleggia for 2000 Series Large Format Printers\u003c\/strong\u003e.\u003c\/p\u003e\u003ch2\u003eSpecifiche tecniche\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSource SKU \/ Rows\u003c\/td\u003e\n\u003ctd\u003eGear - 006 \/ 电机，电机轮 row 37\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Tipo\u003c\/td\u003e\n\u003ctd\u003eBrass Gear Puleggia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTooth \/ Profile Reference\u003c\/td\u003e\n\u003ctd\u003e382 reference\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial Reference\u003c\/td\u003e\n\u003ctd\u003ebrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStampante \/ Use Reference\u003c\/td\u003e\n\u003ctd\u003e2000 Series, Large Format, Stampante\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eOpzioni disponibili\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003cth\u003eVariant Option\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eGear - 006\u003c\/td\u003e\n\u003ctd\u003eDefault Title\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm tooth count, outer diameter, bore diameter, shaft shape, keyway or set-screw position, belt pitch, puleggia width, material and installed position. Similar pulleys may not be interchangeable if the bore, belt profile or mounting offset is different.\u003c\/p\u003e\u003ch2\u003eInstallation Notice\u003c\/h2\u003e\u003cp\u003ePower off the stampante before replacement. After installation, check puleggia alignment, belt tension, set-screw tightness, motor direction, carriage\/feed movement and homing before production printing.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCan I choose by tooth count only?\u003c\/strong\u003e\u003cbr\u003eNo. Tooth count must be checked together with bore size, belt pitch, width and mounting position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I send if unsure?\u003c\/strong\u003e\u003cbr\u003eSend photos of the old puleggia, shaft, belt, installed position and stampante model, plus measured bore and outer diameter.\u003c\/p\u003e","brand":"Accessories","offers":[{"title":"Default Title","offer_id":44767867142330,"sku":"Gear - 006","price":6.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/6897\/8362\/files\/382-Brass-Gear-Pulley-for-2000-Series-Large-Format-Printers-1.webp?v=1762931840"},{"product_id":"45-tooth-wide-drive-pulley-for-wide-format-printer","title":"45-Tooth Wide Drive Puleggia per Wide Format Stampante","description":"\u003ch2\u003ePanoramica prodotto\u003c\/h2\u003e\u003cp\u003e45-Tooth Wide Drive Puleggia for Wide Format Stampante is a replacement drive puleggia for large format stampante motor, belt, carriage or drive systems. Choose this part by tooth count, puleggia profile, bore size, shaft fit, belt pitch and old part dimensions.\u003c\/p\u003e\u003ch2\u003eCompatibilità e utilizzo\u003c\/h2\u003e\u003cp\u003eStampante \/ application reference: \u003cstrong\u003eWide Format, Stampante\u003c\/strong\u003e. Model reference: \u003cstrong\u003e45-Tooth Wide Drive Puleggia for Wide Format Stampante\u003c\/strong\u003e.\u003c\/p\u003e\u003ch2\u003eSpecifiche tecniche\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSource SKU \/ Rows\u003c\/td\u003e\n\u003ctd\u003eGear - 017 \/ 电机，电机轮 row 48\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Tipo\u003c\/td\u003e\n\u003ctd\u003eDrive Puleggia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTooth \/ Profile Reference\u003c\/td\u003e\n\u003ctd\u003e45-Tooth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial Reference\u003c\/td\u003e\n\u003ctd\u003econfirm by old puleggia and product photos\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStampante \/ Use Reference\u003c\/td\u003e\n\u003ctd\u003eWide Format, Stampante\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eOpzioni disponibili\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003cth\u003eVariant Option\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eGear - 017\u003c\/td\u003e\n\u003ctd\u003eDefault Title\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm tooth count, outer diameter, bore diameter, shaft shape, keyway or set-screw position, belt pitch, puleggia width, material and installed position. Similar pulleys may not be interchangeable if the bore, belt profile or mounting offset is different.\u003c\/p\u003e\u003ch2\u003eInstallation Notice\u003c\/h2\u003e\u003cp\u003ePower off the stampante before replacement. After installation, check puleggia alignment, belt tension, set-screw tightness, motor direction, carriage\/feed movement and homing before production printing.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCan I choose by tooth count only?\u003c\/strong\u003e\u003cbr\u003eNo. Tooth count must be checked together with bore size, belt pitch, width and mounting position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I send if unsure?\u003c\/strong\u003e\u003cbr\u003eSend photos of the old puleggia, shaft, belt, installed position and stampante model, plus measured bore and outer diameter.\u003c\/p\u003e","brand":"Accessories","offers":[{"title":"Default Title","offer_id":44769243726010,"sku":"Gear - 017","price":44.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/6897\/8362\/files\/45-Tooth-Wide-Drive-Pulley-for-Wide-Format-Printer-1.webp?v=1763200307"},{"product_id":"25-tooth-drive-pulley-for-9000-9100-series-large-format-printers","title":"25-Tooth Drive Puleggia per 9000\/9100 Series Large Format Printers","description":"\u003ch2\u003ePanoramica prodotto\u003c\/h2\u003e\u003cp\u003e25-Tooth Drive Puleggia for 9000\/9100 Series Large Format Printers is a replacement drive puleggia for large format stampante motor, belt, carriage or drive systems. Choose this part by tooth count, puleggia profile, bore size, shaft fit, belt pitch and old part dimensions.\u003c\/p\u003e\u003ch2\u003eCompatibilità e utilizzo\u003c\/h2\u003e\u003cp\u003eStampante \/ application reference: \u003cstrong\u003e9000\/9100 Series, Large Format, Stampante\u003c\/strong\u003e. Model reference: \u003cstrong\u003e25-Tooth Drive Puleggia for 9000\/9100 Series Large Format Printers\u003c\/strong\u003e.\u003c\/p\u003e\u003ch2\u003eSpecifiche tecniche\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSource SKU \/ Rows\u003c\/td\u003e\n\u003ctd\u003eGear - 015 \/ 电机，电机轮 row 46\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Tipo\u003c\/td\u003e\n\u003ctd\u003eDrive Puleggia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTooth \/ Profile Reference\u003c\/td\u003e\n\u003ctd\u003e25-Tooth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial Reference\u003c\/td\u003e\n\u003ctd\u003econfirm by old puleggia and product photos\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStampante \/ Use Reference\u003c\/td\u003e\n\u003ctd\u003e9000\/9100 Series, Large Format, Stampante\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eOpzioni disponibili\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003cth\u003eVariant Option\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eGear - 015\u003c\/td\u003e\n\u003ctd\u003e100:25-Tooth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGear - 015 - 1\u003c\/td\u003e\n\u003ctd\u003e25-Tooth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm tooth count, outer diameter, bore diameter, shaft shape, keyway or set-screw position, belt pitch, puleggia width, material and installed position. Similar pulleys may not be interchangeable if the bore, belt profile or mounting offset is different.\u003c\/p\u003e\u003ch2\u003eInstallation Notice\u003c\/h2\u003e\u003cp\u003ePower off the stampante before replacement. After installation, check puleggia alignment, belt tension, set-screw tightness, motor direction, carriage\/feed movement and homing before production printing.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCan I choose by tooth count only?\u003c\/strong\u003e\u003cbr\u003eNo. Tooth count must be checked together with bore size, belt pitch, width and mounting position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I send if unsure?\u003c\/strong\u003e\u003cbr\u003eSend photos of the old puleggia, shaft, belt, installed position and stampante model, plus measured bore and outer diameter.\u003c\/p\u003e","brand":"Accessories","offers":[{"title":"100:25-Tooth","offer_id":44922802700474,"sku":"Gear - 015","price":42.6,"currency_code":"USD","in_stock":true},{"title":"25-Tooth","offer_id":44922802733242,"sku":"Gear - 015 - 1","price":28.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/6897\/8362\/files\/25-Tooth-Drive-Pulley-for-9000-9100-Series-Large-Format-Printers-1.webp?v=1763200209"},{"product_id":"drive-pulley-for-mimaki-jv300-jv150-printers","title":"Drive Puleggia per Mimaki JV300 \/ JV150 Printers","description":"\u003ch2\u003ePanoramica prodotto\u003c\/h2\u003e\u003cp\u003eDrive Puleggia for Mimaki JV300 \/ JV150 Printers is a replacement drive puleggia for large format stampante motor, belt, carriage or drive systems. Choose this part by tooth count, puleggia profile, bore size, shaft fit, belt pitch and old part dimensions.\u003c\/p\u003e\u003ch2\u003eCompatibilità e utilizzo\u003c\/h2\u003e\u003cp\u003eStampante \/ application reference: \u003cstrong\u003eMimaki JV300, Mimaki JV150, Stampante, 铝制\u003c\/strong\u003e. Model reference: \u003cstrong\u003eDrive Puleggia for Mimaki JV300 \/ JV150 Printers\u003c\/strong\u003e.\u003c\/p\u003e\u003ch2\u003eSpecifiche tecniche\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSource SKU \/ Rows\u003c\/td\u003e\n\u003ctd\u003eGear - 011 \/ 电机，电机轮 row 42\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Tipo\u003c\/td\u003e\n\u003ctd\u003eDrive Puleggia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTooth \/ Profile Reference\u003c\/td\u003e\n\u003ctd\u003econfirm tooth count and puleggia profile by old part\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial Reference\u003c\/td\u003e\n\u003ctd\u003ealuminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStampante \/ Use Reference\u003c\/td\u003e\n\u003ctd\u003eMimaki JV300, Mimaki JV150, Stampante, 铝制\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eOpzioni disponibili\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003cth\u003eVariant Option\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eGear - 011\u003c\/td\u003e\n\u003ctd\u003eJV300 Puleggia (Aluminum)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGear - 011 - 1\u003c\/td\u003e\n\u003ctd\u003eJV300 Puleggia (Plastic)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGear - 011 - 2\u003c\/td\u003e\n\u003ctd\u003eJV300 Driven Puleggia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cp\u003eConfirm tooth count, outer diameter, bore diameter, shaft shape, keyway or set-screw position, belt pitch, puleggia width, material and installed position. Similar pulleys may not be interchangeable if the bore, belt profile or mounting offset is different.\u003c\/p\u003e\u003ch2\u003eInstallation Notice\u003c\/h2\u003e\u003cp\u003ePower off the stampante before replacement. After installation, check puleggia alignment, belt tension, set-screw tightness, motor direction, carriage\/feed movement and homing before production printing.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCan I choose by tooth count only?\u003c\/strong\u003e\u003cbr\u003eNo. Tooth count must be checked together with bore size, belt pitch, width and mounting position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I send if unsure?\u003c\/strong\u003e\u003cbr\u003eSend photos of the old puleggia, shaft, belt, installed position and stampante model, plus measured bore and outer diameter.\u003c\/p\u003e","brand":"iColorPro","offers":[{"title":"JV300 Pulley (Aluminum)","offer_id":44922797981882,"sku":"Gear - 011","price":71.2,"currency_code":"USD","in_stock":true},{"title":"JV300 Pulley (Plastic)","offer_id":44922798014650,"sku":"Gear - 011 - 1","price":59.8,"currency_code":"USD","in_stock":true},{"title":"JV300 Driven Pulley","offer_id":44922798047418,"sku":"Gear - 011 - 2","price":54.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/6897\/8362\/files\/Drive-Pulley-for-Mimaki-JV300-JV150-Printers-1.webp?v=1763200095"}],"url":"https:\/\/www.icolorpro.com\/it\/collections\/gear.oembed","provider":"iColorPro Printing","version":"1.0","type":"link"}